Product Description

Please Note: The Brand / Packaging of this item may vary due to availability. 

Description: 

• No mixing required, just add water. Postmix fixes all types of wood, metal and concrete posts in all types of soil
• Postmix sets in 5-10 minutes and then hardens rapidily to allow for fence hanging in 30 minutes
• Available in 20kg plastic packaging, Postmix can be stored outside without risk of deterioration.
• Health and safety: Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
• Remix Post Mix Concrete is suitable for use in fixing all types of wooden, metal and concrete posts.
• The mix is a kiln dried, pre-blended, factory-produced quick setting concrete, which hardens in approximately 10 minutes after water addition, depending on ambient conditions.

User Instructions

1. Dig a hole to required size for post, half fill the hole with water and place the post in the hole.
2. The material is already pre-mixed. There is no need for mixing. It can simply be emptied straight from the bag into the hole.
3. Add the Remix Post Mix Concrete uniformly around the post, until it is above the level of water. If any dry powder remains visible at this stage, add additional water until absorbed by the material.
4. Adjust the post into position and support appropriately until material set occurs, after approximately 10 minutes.
5. After Laying and once concrete has set, cover with earth, grass or decorative aggregate, as required.